Installing the Paper Cassette Feeder

1.Unpack the paper cassette feeder from the shipping carton. Remove all plastic, tape, and stabilizing material. Save the carton and packing material to use for storing the feeder.

The package should contain the following items:

• Feeder unit

• Paper Cassette with cover

• 2 IOT screws (fig. 10.3)

2.Place the feeder on a level, sturdy surface that meets the guidelines in “Printer Location” in chapter 2.

Fig. 10.1 Paper Cassette Feeder

3.Make sure the printer displays a PLEASE WAIT or READY/IDLE message. Then, turn off the printer, disconnect the power cord from the power supply (fig. 2.6), and disconnect all interface cables.

4.Remove all media from the multipurpose feeder and the output tray; then, close the multipurpose feeder.

5.Pull the cassette out until it stops; then, lift up slightly and remove it from the printer (figs. 2.16 and 2.17).

___________________________________________

Options 10-5

Page 253
Image 253
Xante 3 Series warranty Installing the Paper Cassette Feeder