Xante 3 Series warranty Resetting Custom Curve Defaults, To factory setting

•To save a custom gamma curve to your Macintosh, retrieve it from the printer, and click Save to Disk.

•To save a custom gamma curve to your printer, retrieve it from your system; select the curve to be updated from the Update Transfer Curve list; and click Save to printer.

Resetting Custom Curve Defaults

To reset a custom gamma curve to the factory default (a copy of the standard Gamma 0 curve) or to reset all gamma curves to the factory defaults

1.Highlight the curve to change in Update Gamma Curve list in the Linearization window and click Reset (fig. 3.15). The Reset Curves window appears (fig. 3.18).

	Fig. 3.18	Reset Curves Window
2.	Choose Reset Custom Gamma	X to factory setting (the	X will be

replaced by the number of the curve you highlighted in step 1) or choose Reset all to factory settings. Then, select Negative Film if the final printed output will be a negative print.

3.Click Ok. After the curve or curves are reset, the Linearization window reappears.

4.Click Ok. The Linearization window closes. Select File: Quit to close Command Center.

_____________________________________ Macintosh Setup 3-39