Xante 3 Series warranty Configuration Menus, Selecting Menu Options, Resetting to Factory Defaults

Configuration Menus

Use configuration menus to set printer features and interfaces defaults. This section describes using the configuration menus. The three-fold quick reference sheet in the back of this manual illustrates the configuration menu structure.

Note: PPD options override printer default settings for a specific job or for all jobs sent to the printer from your host.

Selecting Menu Options

The following example explains changing theprinter’s default resolution from 1200 x 1200 dpi to 600 x 600 dpi using control keys

and configuration menus.

1.Make sure the printer is on and idle.

2. Press the MENU key until SETUP:MISC appears.

3.Press the Enter key to enter the Miscellaneous menu.

4. Press the Menu key until MISC:DPI appears in the window.

5.Press the Enter key to enter the DPI menu.

6. Press the Menu key until dpi:600 600 appears.

7.Press the Enter key to select 600 dpi as the default. The selection changes to all capital letters, indicating that is the current default.

8.Press the On Line key. READY/IDLE appears in the window. The printer’s default resolution is now 600 x 600 dpi.

Resetting to Factory Defaults

There are two levels for resetting to factory defaults: Level 1 (full reset) and Level 2 (partial reset).

6-6 Configuration ______________________________________