Adobe PostScript Printer Drivers

The XANTÉ CD-ROM contains the Adobe PSPrinter drivers and

printer PPDs. Before using your printer, install and configure your printer’s Adobe PostScript printer driver and PPD.

Selecting the Adobe PostScript Printer Driver

Select the driver that best fits your needs and system configuration. If the chosen driver is not compatible with your system, try one of the other two drivers.

AdobePS 8.6

The AdobePS 8.6 driver requires the following system setup:

Macintosh running System 7.6.1 or later (AdobePS 8.6 does not run on Macintosh 128K, 512K, or 512Ke computers)

At least 4 MB of memory

At least 2.1 MB of hard disk space plus the space required for

the PPDs (each PPD is approximately 75 K)

Apple ColorSync 2.0.1, if using the AdobePS ColorSync features (AdobePS does not support ColorSync 1.X)

Note: AdobePS is not compatible with Apple QuickDraw GX.

AdobePS 8.6 provides

Adobe PostScript 3 and Adobe PostScript Level 2 support

Full ColorSync 2.1 support

Simplified printer setup and printing interface

Ability to change printers from the Print dialog box

Collation to print multiple document copies as opposed to multiple groups of the same page

Reverse order printing to control the order in which the document pages are printed

3-8 Macintosh Setup

____________________________________

Page 46
Image 46
Xante 3 Series warranty Adobe PostScript Printer Drivers, Selecting the Adobe PostScript Printer Driver, AdobePS