Xante 3 Series warranty Connecting the Power Cord, Connect to the UTP Port

2.Connect the printer to the appropriate port for the cable used on your network.

Fig. 2.31 Connect to the UTP Port

Fig. 2.32 Connect to the Coaxial Port

Before using your printer, set it up for your network environment and configure the Ethernet interface. See chapter 5 for details.

Connecting the Power Cord

1.Make sure the printer’s power switch is off (the O is pressed in).

2.Connect the power cable’s female connector to the back of the printer and the male connector to a standard electrical outlet (fig. 2.33).

Warning: Plug the printer into a dedicated, properly grounded AC outlet. Do not use an extension cord. Use a surge protected outlet to help prevent power source fluctuations from damaging your printer.

2-26 Installation _________________________________________