Xante 3 Series warranty Some characters are missing or only partially printed

Some characters are missing or only partially printed.

•Media may not meet the requirements in “Media Specifications” in chapter 7. If

necessary, replace the media. See “Paper Cassette” and “Multipurpose Feeder” in chapter 2.

•The toner cartridge may need replacing. See “Toner Cartridge” in chapter 2.

Toner on the printed media smears when rubbed.

•Media may be damp or otherwise damaged. Make sure media meets the requirements in

“Media Specifications” in chapter 7. If necessary, replace the media. See “Paper Cassette” and “Multipurpose Feeder” in chapter 2.

•The fuser may not be working properly. The printer displays the E: FUSER status message if there is a hardware problem with the fuser.

Instead of my image (or text), the output is a blank page.

•The sealing tape may not be pulled out of the toner cartridge. Remove the cartridge and pull out the tape. See “Toner Cartridge” in chapter 2.

•The printer may feed two or more sheets of media at a time. Reduce the size of the media stack. See “Paper Cassette” and “Multipurpose Feeder” in chapter 2.

•The density setting may need adjusting. See “Adjusting Print Density” in chapter 6.

•The toner cartridge may need replacing. See “Toner Cartridge” in chapter 2.

11-12 Troubleshooting ____________________________________