Xante 3 Series warranty Xanté Utilities and Application Drivers, Select Start Run Windows 95 or

XANTÉ Utilities Installer runs properly only on an Intel based computer running Windows 95, 98, or NT. To load the Adobe PostScript printer drivers manually, see the CD-ROM’s Readme.pdf and “Adobe PostScript Printer Drivers” later in this chapter. To load QuarkXPress PDFs manually see “PDFs Folder” later in this chapter. To install XANTÉ Command Center manually, run the CD-ROM’s Setup.exe file in the Xutils folder.

XANTÉ Utilities and Application Drivers

Note: To do the NT 4.X setup, you must be logged on as the System Administrator.

1.Insert the XANTÉ Utilities CD-ROM into your PC. XANTÉ

Utilities Installer launches automatically on systems running Windows 95, 98, and NT 4.0. To start the Installer manually, use the following steps.

a.Select Start: Run (Windows 95 or 98).

b.Use Browse to select the CD-ROM’s Xinstall.exe file (Windows 95, 98, NT 3.5.X, and 4.0); then click OK.

2.Click Finish in the XANTÉ Utilities - Welcome window to begin installation.

3.Follow instructions on each window before clicking Next.

When prompted, select the following items to customize your installation.

a.Select your printer model(s) (fig 4.1). There are two screens with product models listings. Choose only the printer(s) that you are installing. Then, click Next.

4-6 PC Setup __________________________________________