Xante 3 Series warranty More X-ACT Calibration Window

1.Open XANTÉ Command Center if necessary; then, select General: X-ACT. The More X-ACT Calibration window appears (fig. 3.19).

Fig. 3.19 More X-ACT Calibration Window

2.Make sure that the same type of media you will use for final printing is loaded in the printer.

3.Select a setting for the media type you are using from the Media Type drop-down menu (fig. 3.20).

Fig. 3.20 Media Types Menu

3-42 Macintosh Setup ____________________________________