Xante 3 Series Initdsks.ps initializes, Printer must be restarted before the change is effective

D.ps contains a Control-D (PostScript’s end-of-job marker) for use with applications that do not send a PostScript end-of-file.

Fonts.ps3 prints a list of Adobe PostScript 3 fonts resident on XANTÉ PostScript 3 printers.

Fontsamp.ps3 prints samples of Adobe PostScript 3 fonts resident on XANTÉ PostScript 3 printers.

Ftp.ps prints instructions for uploading and downloading files to XANTÉ’s FTP (File Transfer Protocol) site.

InitdskX.ps files are used to initialize hard disks attached to or installed in your printer.

•Numbered files initialize the SCSI disk with the same device number (Initdsk1.ps initializes SCSI disk #1, Initdsk2.ps initializes SCSI disk #2, etc.) on the printer.

•Initdska.ps and Initdskb.ps initialize the internal IDE drive of the same designation (the A or B disk) on the printer.

•	Initdsks.ps initializes	all SCSI and IDE drives	attached to the
	printer.

A hard disk must be initialized before it can be used to store downloaded fonts or to set up a spooling queue. Initializing a disk erases all information stored on that disk.

Novell34.ps prints instructions for setting up a XANTÉ printer on a Novell network.

Parmdump.ps prints a list of current settings for the communication devices configured for your printer.

Set_ip.ps allows you to set your printer’s IP address. Open the file in a text editor and change the IP address in the parentheses to your printer’s IP address. Save the file, and download it to your printer.

The printer must be restarted before the change is effective.

4-26 PC Setup __________________________________________