Mac Watermark Plug-in Folder

Each language directory in the PSPrinter 8.3 folder has a Mac Watermark Plug-in folder. This folder contains the Adobe PSPrinter 8.3 Watermark plug-in for the Macintosh and a user guide. These files

allow you to customize your output with underlying watermarks.

The plug-in requires the following system setup:

PSPrinter 8.3.1 (does not work with AdobePS 8.5.1)

Macintosh running System 7.1 or later

100 K of available disk space for the plug-in, preferences, and Watermarks folder

The user guide (less than 10 page SimpleText file) describes system requirements and plug-in installation. To print this guide, double-click WM UserGuide; then, select File: Print.

Configuring the PPD

1.Select Chooser from the Apple menu. The Chooser window appears (fig. 3.4).

2.Select AdobePS or PSPrinter from the box on the left (top left in a network environment); a list of available printers appears

to the right.

Note: If the printer does not appear in the list, verify that —the printer is on and cable connections are secure —LocalTalk or EtherTalk (depending on your setup)

is enabled on the printer front panel

—the correct protocol (AppleTalk or EtherTalk) is selected on the front panel

—your Macintosh is setup for LocalTalk or EtherTalk in the AppleTalk Control panel.

3-14 Macintosh Setup

____________________________________

Page 52
Image 52
Xante 3 Series Configuring the PPD, Mac Watermark Plug-in Folder, To the right Is enabled on the printer front panel