Xante 3 Series warranty Smooth Shading, Soft Error

Note: See “Printer Memory Requirements” in chapter 9 about the RAM required to print at higher resolutions.

Set available resolutions using either the MISC:DPI configuration menu or the Print dialog box’s Resolution menu.

If the resolution upgrade is installed and adequate RAM is available, but the upgrade cannot be selected in your application Print dialog box (it is grayed out), RAM may not be configured properly in the PPD. See the section on configuring the PPD for your operating system in chapter 3 (Macintosh) or 4 (PC).

Smooth Shading

Smooth Shading allows you to use the Adobe PostScript 3 method of rendering gradient blends. Smooth Shading produces the highest quality image at the selected resolution. For some images, PostScript files created with Smooth Shading are smaller and print faster than those created using PostScript Level 2.

Set Smooth Shading from your application Print dialog box. Off, the factory default, disables this feature. Options of Maximum, High, Medium, Low are available.

Soft Error

Soft Error alerts you that the printer requires attention. Examples are low toner and low paper messages.

Set Soft Error using the front panel MISC:SOFTERROR

configuration menu. Yes, the factory default, enables this feature; No disables it.

Note: While soft error messages are very helpful, occasionally some software misinterprets the messages. If you run into problems with a particular software, try disabling this feature.

_______________________________________ Configuration 6-35