Xante 3 Series Clearing a Duplexer Jam, Remove any jammed paper from the top of the duplexer fig

Note: If the duplexer unit was installed on the printer, reinstall it after removing the media jam from the paper exit area. See “Duplexer” in chapter 10.

Clearing a Duplexer Jam

1.Open the duplexer’s top cover by pulling it toward the back of the printer (fig. 11.22).

Fig. 11.22 Open the Duplexer Top Cover

2.Remove any jammed paper from the top of the duplexer (fig. 11.23).

Note: Be careful with the jammed paper. Since the toner has not been fixed properly, it may rub off.

11-32 Troubleshooting ____________________________________