2.Align tabs on the front of the controller board panel with the slots in the front of the opening; then slide the panel forward into place (fig. 10.29).

3.Secure the controller board panel to the printer by tightening the screws on the back of the panel (fig. 10.28).

4.Reconnect all interface cables and reconnect the power cable to the printer and the AC power supply.

Internal IDE Hard Disk Upgrade

The internal hard disk upgrade provides extra space to store downloaded fonts and allows you to implement the Font Accelerator and spooling features on your printer. See “Printer Options,” earlier in this chapter to order this upgrade. See “Font Accelerator” and “Spooler” in chapter 6 and “Procedures” in chapter 3 (Macintosh) or 4 (PC).

The internal hard disk upgrade can be factory or user installed. Installation instructions are included with the upgrade.

10/100BaseT Upgrade

You can upgrade the printer’s standard 10BaseT unshielded twisted pair configuration for the Ethernet port to a 10/100BaseT configuration. See “Printer Options,” earlier in this chapter to order this upgrade. See “Connecting to the Ethernet Port” in chapter 2.

This upgrade can be factory or user installed. Installation instructions are included with the upgrade.

◊ ◊ ◊

___________________________________________ Options 10-33

Page 281
Image 281
Xante 3 Series warranty Internal IDE Hard Disk Upgrade, 10/100BaseT Upgrade