5.Align the paper stack and load it into the cassette print side up, leading edge to the back. See “Media Sources” in chapter 7 to determine whether to load media short or long edge first (fig.

2.20).

Fig. 2.20 Load the Paper

6.Adjust media guides to the size of the paper stack.

Caution: To prevent paper jams, make sure the paper fits between the paper guides and under the cassette’s retaining clips (fig. 2.20).

7.Replace the cassette cover.

8.Slide the cassette into the printer until it snaps into place.

Note: You will feel a slight resistance as you push the cassette into the printer caused by the catch that prevents the cassette from being dropped.

2-16 Installation _________________________________________

Page 26
Image 26
Xante 3 Series warranty Load the Paper