Xante 3 Series warranty Status Messages

Introduction

This chapter describes the status messages that can direct you to the source of a problem, suggests solutions for some typical printer setup and print quality problems, and provides information about preventing and clearing paper jams.

Status Messages

Printer front panel window messages provide printer status information and can help you determine the source of a problem or paper jam.

Accel-a-Writer 3X	Appears when the printer is first turned
	on, before the initialization process
	begins. The X will be replaced by the
	letter of the printer model.
DUPLEX COVER OPEN	The duplexer cover is not closed
	properly.
DUPLEX PAPER JAM	A paper jam has occurred in or before
	the duplexer.
EARLY PAPER JAM	A media jam has occurred along the
	paper path caused by media reaching a
	position earlier than expected.
E:FIFO	The FIFO SIMM or SODIMM is not
	present, is not properly inserted, or is
	broken.
E:FIXING ROLLER	There is a hardware problem with the
	fuser.
E:FUSER	There is an error with the fuser, such as
	a temperature inaccuracy.
E:LASER	There is a hardware problem with the
	laser.

_____________________________________ Troubleshooting 11-3