Xante 3 Series Motor, Media jam has occurred after, Paper has been printed but before it has

E:MOTOR	There is a hardware problem with the
	motor.
EXIT PAPER JAM	A media jam has occurred after the
	paper has been printed but before it has
	been deposited in the output tray.
FRONT COVER OPEN	The multipurpose feeder cover is open.
FRONT PAPER JAM	A media jam has occurred caused by the
	media not being pulled from the tray
	properly.
FULL STACK	The output tray is full.
FUSER COVER OPEN	The fuser cover is not closed properly.
HOLDING	The printer is offline and data is coming
	across one (or more) of the interfaces.
	The printer cannot receive the data when
	it is offline.
INITIALIZING	The printer is warming up and
	performing setup routines.
LATE PAPER JAM	A media jam has occurred caused by the
	media not reaching the exit roller at the
	correct time.
LOW PAPER	The paper stack is low in the selected
	cassette or optional 2,000 sheet feeder.
	The message appears during each paper
	feed when the paper stack is fewer than
	approximately 25 pages.
LOW TONER	Toner in the cartridge is low or needs to
	be redistributed.
NO TONER CART	The toner cartridge is either not in the
	printer or not seated in place.

11-4 Troubleshooting ____________________________________