Note: If you already have NetBEUI installed as a protocol, skip step 4.

4.Click Add, Protocol, Microsoft, and NetBEUI. Then, press OK. You may need the Window 95/98 OS CD to install the necessary drivers. If so, insert the CD in your CD-ROM drive and click OK.

Note: If you already have Client for Microsoft Networks installed as a client, skip step 5.

5.Click Add, Client, Microsoft, and Client for Microsoft Networks. Then, click OK.

6.Click NetBEUI under Network Configuration and click Properties. Under Advanced Properties, select “Set this protocol to be the default protocol.” Then, click OK.

Make sure your PC is connected to the network properly. You will need to restart your computer for the new network changes to take affect.

Note: MS Networks can delay updating the network for a few minutes.

Print Queue Setup

Once your PC is restarted with the new network changes, you can establish a print queue to your XANTÉ printer.

1.Run the Adobe PostScript printer driver installation.

2.Select Network Printer.

3.Click Browse. Click “+” to the left of Entire Network. A domain called XANTÉ Printer should appear if a XANTÉ printer with NetBEUI interface is on the network.

4.Click “+” to the left of XANTÉ printers to see a list of printers.

_______________________________________

Ethernet Setup 5-33

Page 173
Image 173
Xante 3 Series warranty Print Queue Setup