Xante 3 Series warranty NetBEUI Configuration, NetBEUI Constraints

5.Click on your printer’s name. When a prompt appears asking “Do you want to capture AppleTalk printing device,” click Yes to make NT a print server for your network.

Note: If you select Yes, NT hides the AppleTalk name from the Macintosh Chooser. If you select No, the Macintosh can still print directly.

6.Select the General tab; then, click Print Test Page and check the printer to see if the Windows NT Test Page printed correctly.

7.Click OK. The Printer Properties window closes.

8.Select File: Close. The Printers window closes.

After installing and configuring the AdobePS printer driver and PPD, see “Configuring the Printer” in chapter 4 to verify that printer interfaces are configured properly.

NetBEUI Configuration

NetBEUI (NetBIOS Extended User Interface) is the Microsoft Windows networking interface standard for Windows 95 and 98, Workgroups, Microsoft LAN Manager and MS-DOS’s Workgroup add-on). On a Windows 95 or 98 system, NetBEUI installs using the procedure later in this section. Configuration consists of simply setting the computer name and a workgroup or domain name.

Note: A NetBEUI setup is limited to 25 or fewer users.

NetBEUI features fast communication, self-tuning performance, low overhead, and very little configuration. However, it is not routable.

NetBEUI Constraints

When you work with your XANTÉ printer and NetBEUI, you need to keep the following constraints in mind.

_______________________________________ Ethernet Setup 5-31