Xante 3 Series warranty Reset Curves Window

	Fig. 4.27 Reset Curves Window
2.	Choose either Reset Custom Gamma	X to factory setting (the	X

will be replaced by the number of the curve you highlighted in step 1) or choose Reset all to factory settings. Then, select Negative Film if the final printed output will be a negative print.

3.Click Ok. After the curve or curves are reset, the Linearization window reappears.

4.Click Close; the Linearization window closes. Then, select File: Exit to close Command Center.

Accurate Calibration Technology (X-ACT)

Use XANTÉ’s patented X-ACT feature to calibrate your printer in two ways, through the front panel MISC:XACT menu or through XANTÉ Command Center’s X-ACT menu.

Front Panel X-ACT

Your printer’s front panel MISC:XACT menu allows you to make 1/2 mm line length adjustments using the following procedure.

4-44 PC Setup __________________________________________