Xante 3 Series warranty Following procedure, Linearization Window

Fig. 3.15 Linearization Window

2.Change the Linearization window LPI setting in the Print box (fig. 3.15) to achieve 256 levels of gray for the resolution at which you are printing.

Note: For 600 dpi, select 85 lpi; for 1200 dpi, select 106 lpi; for 2400 dpi, select 133 to 150 lpi. Any lpi may be

used; measure the lpi that is to be used for final output.

3.	Print a Calibration Page to m	easure the printer’s current
	performance as a basis for the calibration. To do this		use the
	following procedure:

_____________________________________ Macintosh Setup 3-33