Enable UPnP | If enabled, the NAS will broadcast its availability. On systems |
Support | which support UPnP (e.g. Windows ME, XP), an icon for the |
| NAS will be automatically generated. |
|
|
Port Number.. | This port number is used for HTTP (Web Browser) connections |
| to this Server. The default is 80, as used by Web Servers. If this |
| is changed, you should use a number greater than 1024 (8080 is |
| often used). Also, if the port is not 80, you must specify the port |
| in your Web browser, in order to connect. To do this, add a ":" |
| and the port number after the address: e.g. |
| HTTP://192.168.0.100:8080 |
| This example assumes the NAS IP Address is 192.168.0.100, and |
| the port number is 8080. |
|
|
Restore Default | Click this button to restore ALL settings to the factory defaults. |
Config Button | Data stored on the Server is not affected. |
| |
|
|
Page 27
