VLANs
Configuring ports and VLANs on Switch 2 (CLI example)
To configure ports and VLANs on Switch 2, do the following:1.On Switch 2, enable VLAN tagging on the necessary ports. Port 4 (connection to server 2) remains
untagged, so it is not configured below.Main# /cfg/port | 2 | (Select port 2: connection to server 1) | ||
>> Port | 2# tag e |
|
| |
Current | VLAN | tag support: disabled | ||
New VLAN tag | support: | enabled | ||
Port 2 changed to tagged. |
| |||
Main# /cfg/port | 18 | (Select uplink port 18) | ||
>> Port | 18# tag | e | (Enable tagging) | |
Current | VLAN | tag support: | disabled | |
New VLAN tag | support: | enabled | ||
Port 18 | changed | to tagged. |
| |
>> Port | 18# apply | (Apply the port configurations) |
2.Configure the VLANs and their member ports. Since all ports are by default configured for VLAN 1, configure only those ports that belong to other VLANs.
>>/cfg/l2/vlan 3
>>VLAN 3# add 2
Current ports for VLAN 3: empty
Pending new ports for VLAN 3: 2
>> VLAN 3# add 4
Port 4 is an UNTAGGED port and its current PVID is 1. Confirm changing PVID from 1 to 2 [y/n]: y
Current ports for VLAN 3: 2
Pending new ports for VLAN 3:
>> VLAN 3# add 18
Current ports for VLAN 3: 2
Pending new ports for VLAN 3: 18
>>/cfg/l2/vlan 4
>>VLAN 4# add 20
Port 20 is an UNTAGGED port and its current PVID is 1.
Confirm changing PVID from 1 to 2 [y/n]: y
Current ports for VLAN 4: empty
Pending new ports for VLAN 4: 20
>> | apply | (Apply the port configurations) |
>> | save | (Save the port configurations) |
63