Accessing the switch
A value of 0 denotes that RSA server key autogeneration is disabled. When greater than 0, the switch will auto generate the RSA server key every specified interval; however, RSA server key generation is skipped if the switch is busy doing other key or cipher generation when the timer expires.
The switch will perform only one session of key/cipher generation at a time. Thus, an SSH/SCP client will not be able to log in if the switch is performing key generation at that time, or if another client has logged in immediately prior. Also, key generation will fail if an SSH/SCP client is logging in at that time.
SSH/SCP integration with RADIUS and TACACS+ authentication
SSH/SCP is integrated with RADIUS and TACACS+ authentication. After the RADIUS or TACACS+ server is enabled on the switch, all subsequent SSH authentication requests will be redirected to the specified RADIUS or TACACS+ servers for authentication. The redirection is transparent to the SSH clients.
User access controlThe switch allows an administrator to define end user accounts that permit end users to perform limited actions on the switch. Once end user accounts are configured and enabled, the switch requires username/password authentication.
For example, an administrator can assign a user who can log into the switch and perform operational commands (effective only until the next switch reboot).
The administrator defines access levels for each switch user, as shown in the following table. Table 6 User access levels
User account | Description | Password |
|
|
|
Administrator | The Administrator has complete access to all menus, information, and | admin |
| configuration commands on the switch, including the ability to change both |
|
| the user and administrator passwords. |
|
|
|
|
Operator | The Operator manages all functions of the switch. The Operator can reset | oper |
| ports or the entire switch. |
|
|
|
|
User | The User has no direct responsibility for switch management. | user |
| Users can view all switch status information and statistics but cannot make |
|
| any configuration changes to the switch. |
|
|
|
|
Passwords can be up to 128 characters in length for TACACS+, Telnet, SSH, console, and BBI access. When RADIUS authentication is used, the maximum password length is 32 characters.
If RADIUS authentication is used, the user password on the Radius server will override the user password on the switch. Also note that the
34