Troubleshooting tools
Ingress traffic is duplicated and sent to the mirrored port before processing, and egress traffic is duplicated and sent to the mirrored port after processing.
Configuring Port Mirroring (CLI example)
To configure Port Mirroring for the example shown in the preceding figure:1.Specify the monitoring port.>> # /cfg/pmirr/monport 18 | (Select port 18 for monitoring) |
>> Port 18 # add 21 | (Select port 21 to mirror) |
>>Enter port mirror direction [in, out, or both]: in (Monitor ingress traffic on port 21)
>> Port 18 # add 1 | (Select port 1 to mirror) |
>>Enter port mirror direction [in, out, or both]: out (Monitor egress traffic on port 1)
3.Enable Port Mirroring.
| >> # /cfg/pmirr/mirr ena | (Enable port mirroring) | ||
4. Apply and save the configuration. |
|
| ||
| >> PortMirroring# apply | (Apply the configuration) |
| |
| >> PortMirroring# save | (Save the configuration) |
| |
5. View the current configuration. |
|
| ||
| >> PortMirroring# cur | (Display the current settings) |
| |
| Port mirroring is enabled |
|
| |
| Monitoring Ports Mirrored Ports |
|
| |
| 1 | none |
|
|
| 2 | none |
|
|
| 3 | none |
|
|
| 4 | none |
|
|
| 5 | none |
|
|
|
| : |
|
|
|
| : |
|
|
| 16 | none |
|
|
| 18 (21, in) (1, out) |
|
| |
| 20 | none |
|
|
| 21 | none |
|
|
192