Ports and trunking
Configuring LACP
Use the following procedure to configure LACP for port 20 and port 21 to participate in link aggregation.
1.Set the LACP mode on port 20.>> | # /cfg/l2/lacp/port 20 | (Select port | 20) |
>> | LACP port 20# mode active | (Set port 20 | to LACP active mode) |
2.Define the admin key on port 20. Only ports with the same admin key can form a LACP trunk group.
| >> LACP port 20# | adminkey 100 | (Set port 20 adminkey to 100) |
| Current LACP port adminkey: | 17 | |
| New pending LACP port adminkey: | 100 | |
3. Set the LACP mode on port 21. |
| ||
| >> # /cfg/l2/lacp/port 21 | (Select port 21) | |
| >> LACP port 21# mode active | (Set port 21 to LACP active mode) | |
4. Define the admin key on port 21. |
| ||
| >> LACP port 21# adminkey 100 | (Set port 21 adminkey to 100) | |
| Current LACP port adminkey: | 18 | |
| New pending LACP port adminkey: | 100 |
>> | LACP | port | 21# | apply | (Make | your changes active) |
>> | LACP | port | 21# | cur | (View | current trunking configuration) |
>> LACP port 21# save | (Save for restore after reboot) |
46