HP 445946-001 3.Apply and save the configuration, Port-basedNetwork Access and traffic control, 1.Configure the traffic-controlthreshold and enable traffic control

Port-based Network Access and traffic control

Configuring port-based traffic control

To configure a port for traffic control, perform the following steps:1.Configure the traffic-control threshold and enable traffic control.

Main# /cfg/port 2

>>Port 2# brate 150000

>>Port 2# mrate 150000

>>Port 2# drate 150000

(Set broadcast threshold) (Set multicast threshold) (Set DLF threshold)

2.To disable a traffic-control threshold, use the following command:

>> Port 2# mrate dis (Disable multicast threshold)

3.Apply and save the configuration.

>>	Port	2#	apply	(Apply the port configurations)
>>	Port	2#	save	(Save the port configurations)

52