Emerson Process Management 2400S 19.0005.13, 0.0010, 0.9980, 1 Sensor calibration parameters

Required Transmitter Configuration

Table 6-1Sensor calibration parameters

		Sensor type
Parameter	T-Series	Other
K1	✓	✓
K2	✓	✓
FD	✓	✓
D1	✓	✓
D2	✓	✓
Temp coeff (DT)(1)	✓	✓
Flowcal		✓(2)
FCF	✓
FTG	✓
FFQ	✓
DTG	✓
DFQ1	✓
DFQ2	✓

(1)On some sensor tags, shown as TC.

(2)See the section entitled “Flow calibration values.”

Figure 6-1Sample calibration tags

T-Series Other sensors

19.0005.13 12500142864.44

0.0010	12502.000
0.9980	14282.000
4.44000	310

Flow calibration values

Two factors are used to define flow calibration:

•The flow calibration factor, which is a 6-character string (five numbers and a decimal point)

•The temperature coefficient for flow, which is a 4-character string (three numbers and a decimal point)

These values are concatenated on the sensor tag, but different labels are used for different sensors. As shown in Figure 6-1:

•For T-Series sensors, the value is called the FCF value.

•For other sensors, the value is called the Flow Cal value.

26 Micro Motion® Model 2400S Transmitters for DeviceNet™