Emerson Process Management 2400S manual 1 Configuration map continued

Optional Configuration

Table 8-1Configuration map continued

			Tool
Topic	Subtopic	ProLink II	DeviceNet tool	Display	Section
Display(1)	Update period	✓	✓	✓	8.9.1
	Display language	✓	✓	✓	8.9.2
	Totalizer start/stop	✓	✓	✓	8.9.3
	Totalizer reset	✓	✓	✓
	Auto scroll	✓	✓	✓
	Scroll rate	✓	✓	✓
	Offline menu	✓	✓	✓
	Password	✓	✓	✓
	Alarm menu	✓	✓	✓
	Ack all	✓	✓	✓
	Backlight on/off	✓	✓	✓	8.9.4
	Backlight intensity	✓	✓
	Display variables	✓	✓		8.9.5
	Display precision	✓	✓
Digital	DeviceNet node address		✓	(2)	8.10.1
communication
	DeviceNet baud rate		✓	(2)	8.10.2
	DeviceNet configurable input		✓		8.10.3
	assembly
	Modbus address	✓	✓	✓	8.10.4
	Modbus ASCII support	✓	✓	✓	8.10.5
	IrDA port usage	✓	✓	✓	8.10.6
	Digital communications fault	✓	✓		8.10.78.10.
	action				7
	Fault timeout	✓	✓		8.10.8
Device settings		✓	✓		8.11
Sensor parameters		✓	✓		8.12
Petroleum		✓	✓		8.13
measurement
application
Enhanced density		✓	✓		8.14
application

(1)These parameters apply only to transmitters with a display.

(2)Cannot be set with the display menus, but can be set with digital communications hardware switches on the face of the transmitter.

8.2Configuring volume flow measurement for gas

Two types of volume flow measurement are available:

•Liquid volume (the default)

•Gas standard volume

56 Micro Motion® Model 2400S Transmitters for DeviceNet™