Emerson Process Management 2400S 3.5.3Using display menus, 3 Entering the display menu system

Using the Transmitter User Interface

3.5.3Using display menus

Note: The display menu system provides access to basic transmitter functions and data. It does not provide access to all functions and data. To access all functions and data, use either ProLink II or a customer-supplied DeviceNet tool.

To enter the display menu system, see the flowchart shown in Figure 3-3.

Figure 3-3Entering the display menu system

Scroll and Select simultaneously

for 4 seconds

Before You Begin

No

Unlock

Scroll

Select

Scroll

Display password	YES
enabled?

CODE?

Enter password

Startup

SEE ALARM or OFF-LINE MAINT

Note: Access to the display menu system may be enabled or disabled. If disabled, the OFF-LINE MAINT option does not appear. For more information, see Section 8.9.

The unlock sequence prevents unintentional entry to the offline menu. A prompt is shown for each step, and the user has 10 seconds to perform the action.

If no optical switch activity occurs for two minutes, the transmitter will exit the off-line menu system and return to the process variable display.

To move through a list of options, activate Scroll.

To select from a list or to enter a lower-level menu, Scroll to the desired option, then activate Select. If a confirmation screen is displayed:

•To confirm the change, activate Select.

•To cancel the change, activate Scroll. To exit a menu without making any changes

•Use the EXIT option if available.

•Otherwise, activate Scroll at the confirmation screen.

Transmitter User Interface

Using ProLink II

Configuration and Use Manual 13