Emerson Process Management 2400S manual 1Viewing and acknowledging alarms with the display

Using the Transmitter

Figure 7-1Viewing and acknowledging alarms with the display

Scroll and Select simultaneously
	for 4 seconds
	SEE ALARM
		Select
	ACK ALL(1)			(1) This screen is displayed only if the ACK ALL
Yes			No	function is enabled (see Section 8.9.3) and
				there are unacknowledged alarms.
Select			Scroll
		EXIT
Select			Scroll
			Active/
		unacknowledged
			alarms?
		Yes	No
Alarm code				NO ALARM
Scroll	Select			Scroll
	ACK			EXIT
Yes		No
Select		Scroll

7.6.2Using ProLink II

ProLink II provides two ways to view alarm information:

•The Status window

•The Alarm Log window

Status window

The Status window displays the current status of the alarms considered to be most useful for information, service, or troubleshooting, including Ignore alarms. The Status window reads alarm status bits, and does not access alarm history. The Status window does not display acknowledgment information, and you cannot acknowledge alarms from the Status window.

Using a DeviceNet Tool

Required Configuration

Using the Transmitter

Optional Configuration

Configuration and Use Manual 45