Optional Configuration
In addition, if you are using ProLink II or a DeviceNet tool, you can control the intensity of the backlight. You can specify any value between 0 and 63; the higher the value, the brighter the backlight. To control the intensity of the backlight:
•Using ProLink II, see Figure
•Using a DeviceNet tool, see Table
8.9.5Configuring the display variables and display precision
The display can scroll through up to 15 process variables in any order. You can configure the process variables to be displayed and the order in which they should appear. Additionally, you can configure display precision for each display variable. Display precision controls the number of digits to the right of the decimal place. Precision can be set to any value from 0 to 5.
•To configure display variables or display precision using ProLink II, see Figure
•To configure display variables using a DeviceNet tool, see Table
•To configure display precision using a DeviceNet tool, refer to Table
a.Set the process variable index (Attribute 29) to the process variable to be configured.
b.Set the precision (Attribute 30) for that process variable.
Note: This functionality is not available via the display menus.
Table
Table
Display variable | Process variable |
|
|
Display variable 1(1) | Mass flow |
|
|
Display variable 2 | Mass totalizer |
|
|
Display variable 3 | Volume flow |
|
|
Display variable 4 | Volume totalizer |
|
|
Display variable 5 | Density |
|
|
Display variable 6 | Temperature |
|
|
Display variable 7 | External temperature |
|
|
Display variable 8 | External pressure |
|
|
Display variable 9 | Mass flow |
|
|
Display variable 10 | None |
|
|
Display variable 11 | None |
|
|
Display variable 12 | None |
|
|
Display variable 13 | None |
|
|
Display variable 14 | None |
|
|
Display variable 15 | None |
|
|
(1) Display variable 1 cannot be set to None.
Using a DeviceNet Tool
Required Configuration
Using the Transmitter
Optional Configuration
Configuration and Use Manual | 69 |
