Emerson Process Management 2400S manual Net mass flow

Device Profile

Table C-11Enhanced Density Object (0x6A) – Instance 1 continued

Attrib
ID	Name	Data type	Service	Mem	Description	Comments
8	Net mass flow	REAL	Get	V	Current value
	inventory		Reset(4)
9	Net volume flow	REAL	Get	V	Current value
	rate
10	Net volume flow	REAL	Get	V	Current value
	total		Reset(5)
11	Net volume flow	REAL	Get	V	Current value
	inventory		Reset(6)
12	Concentration	REAL	Get	V	Current value
13	Density (fixed	REAL	Get	V	Current value
	Baume units)
15	Derived variable	USINT	Set	NV		• 0 = None
						• 1 = Density at
						reference
						temperature
						• 2 = Specific gravity
						• 3 = Mass
						concentration
						(density)
						• 4 = Mass
						concentration
						(specific gravity)
						• 5 = Volume
						concentration
						(density)
						• 6 = Volume
						concentration
						(specific gravity)
						• 7 = Concentration
						(density)
						• 8 = Concentration
						(specific gravity)
16	Active	USINT	Set	NV	The number of the curve	0–5
	calculation curve				that is currently active
38	Curven ASCII	SHORT	Set	NV	The name of the active	24 characters
	string	STRING			curve	maximum
39	Enable	BOOL	Set	NV		• 0 = Disabled
	enhanced					• 1 = Enabled
	density
	application
47	Reset standard	USINT	Set	V	Resets the standard	• 1 = Reset
	volume total				volume total
48	Reset standard	USINT	Set	V	Resets the standard	• 1 = Reset
	volume				volume inventory
	inventory
49	Reset net mass	USINT	Set	V	Resets the net mass total	• 1 = Reset
	total

164 Micro Motion® Model 2400S Transmitters for DeviceNet™