Emerson Process Management 2400S manual Default Values and Ranges, Type, Setting, Comments

Default Values and Ranges

Table A-1Transmitter default values and ranges continued

Type	Setting	Default	Range	Comments
Density	Density damping	1.28 sec	0.0–40.96 sec	User-entered value is
				corrected to nearest value in
				list of preset values.
	Density units	g/cm3
	Density cutoff	0.2 g/cm3	0.0–0.5 g/cm3
	D1	0.00000
	D2	1.00000
	K1	1000.00
	K2	50,000.00
	FD	0.00000
	Temp Coefficient	4.44
Slug flow	Slug flow low limit	0.0 g/cm3	0.0–10.0 g/cm3
	Slug flow high limit	5.0 g/cm3	0.0–10.0 g/cm3
	Slug duration	0.0 sec	0.0–60.0 sec
Temperature	Temperature damping	4.8 sec	0.0–38.4 sec	User-entered value is
				corrected to nearest lower
				value in list of preset values.
	Temperature units	Deg C
	Temperature calibration factor	1.00000T0.0000
Pressure	Pressure units	PSI
	Flow factor	0.00000
	Density factor	0.00000
	Cal pressure	0.00000
T-Series sensor	D3	0.00000
	D4	0.00000
	K3	0.00000
	K4	0.00000
	FTG	0.00000
	FFQ	0.00000
	DTG	0.00000
	DFQ1	0.00000
	DFQ2	0.00000
Events 1–5	Type	Low
	Variable	Density
	Setpoint	0.0
	Setpoint units	g/cm3

132 Micro Motion® Model 2400S Transmitters for DeviceNet™