Using the Transmitter User Interface
To change from decimal to exponential notation (see Figure
1.Select until the rightmost digit is flashing.
2.Scroll to E, then Select. The display changes to provide two spaces for entering the exponent.
3.To enter the exponent:
a.Select until the desired digit is flashing.
b.Scroll to the desired value. You can enter a minus sign (first position only), values between 0 and 3 (for the first position in the exponent), or values between 0 and 9 (for the second position in the exponent).
c.Select.
Note: When switching between decimal and exponential notation, any unsaved edits are lost. The system reverts to the previously saved value.
Note: While in exponential notation, the positions of the decimal point and exponent are fixed.
Figure 3-5 Numeric values in exponential notation
SX.XXXEYY
Before You Begin
Startup
Sign
Digits
Enter a
Digit
Sign or Digit
E Exponent indicator
To change from exponential to decimal notation:
1.Select until the E is flashing.
2.Scroll to d.
3.Select. The display changes to remove the exponent. To exit the menu:
•If the value has been changed, Select and Scroll simultaneously until the confirmation screen is displayed.
-Select to apply the change and exit.
-Scroll to exit without applying the change.
•If the value has not been changed, Select and Scroll simultaneously until the previous screen is displayed.
Transmitter User Interface
Using ProLink II
Configuration and Use Manual | 15 |