Emerson Process Management 2400S Display, Compensation Measurement Performance, Troubleshooting

Default Values and Ranges

Table A-1Transmitter default values and ranges continued

Type	Setting	Default	Range	Comments
Display	Backlight on/off	On
	Backlight intensity	63	0–63
	Update period	200 milliseconds	100–10,000
			milliseconds
	Variable 1	Mass flow rate
	Variable 2	Mass total
	Variable 3	Volume flow rate
	Variable 4	Volume total
	Variable 5	Density
	Variable 6	Temperature
	Variable 7	Drive gain
	Variable 8–15	None
	Display totalizer start/stop	Disabled
	Display totalizer reset	Disabled
	Display auto scroll	Disabled
	Display offline menu	Enabled
	Display offline password	Disabled
	Display alarm menu	Enabled
	Display acknowledge all	Enabled
	alarms
	Offline password	1234
	Auto scroll rate	10 sec
Digital	Fault action	None
communi-
	Fault timeout	0 seconds	0.0–60.0 sec
cations
	Modbus address	1
	Modbus ASCII support	Enabled
	IrDA port enabled/disabled	Disabled
	IrDA port write-protect	Disabled
	Floating-point byte order	3–4–1–2

Compensation

Measurement Performance

Troubleshooting

Defaults

Configuration and Use Manual 133