Emerson Process Management 2400S manual Sensor Information Object

Device Profile

Table C-7Diagnostics Object (0x66) – Instance 1 continued

Attrib
ID	Name	Data type	Service	Mem	Description	Comments
83	Factory flow	REAL	Get	NV	The flow signal offset at	Unit = microseconds
	signal offset at				zero flow when calibrated
	zero flow				at the factory
84	Discrete event	USINT	Set	V	The action that will be	• 1 = Start sensor zero
	action code				performed by the event	• 2 = Reset mass total
					specified in Attribute 85	• 3 = Reset volume
						total
						• 4 = Reset API volume
						total
						• 5 = Reset ED volume
						total
						• 6 = Reset ED net
						mass total
						• 7 = Reset ED net
						volume total
						• 8 = Reset all totals
						• 9 = Start/stop all
						totals
						• 18 = Increment ED
						curve
						• 21 = Reset GSV total
85	Discrete event	USINT	Set	NV	The discrete event that is	• 57 = Discrete event 1
	assignment				assigned to the action	• 58 = Discrete event 2
					referenced in Attribute 84	• 59 = Discrete event 3
						• 60 = Discrete event 4
						• 61 = Discrete event 5
						• 251 = None
(1) Service code 0x4D.

C.6	Sensor Information Object (0x67)
Table C-8Sensor Information Object (0x67) – Instance 1
Attrib
ID	Name	Data type	Service	Mem	Description	Comments
1	Sensor serial	UDINT	Set	NV	The serial number of the
	number				sensor
2	Sensor type	SHORT	Get	NV	A string that represents	For example, F200,
		STRING			the type of sensor	CMF025
3	Sensor type	USINT	Set	NV	The type of sensor	• 0 = Curved tube
	code					• 1 = Straight tube

Menus

Device Profile

Display Codes

Index

Configuration and Use Manual 159