Emerson Process Management 2400S 1.4DeviceNet functionality, 1.5Determining version information

Before You Begin

1.4DeviceNet functionality

The Model 2400S DN transmitter implements the following DeviceNet functionality:

•Baud rates:

-125 kBaud

-250 kBaud

-500 kBaud

•I/O slave messaging:

-Polling

-Cyclic

•Configuration methods:

-Hardware switches

-EDS

-Custom software

1.5Determining version information

Table 1-1lists the version information that you may need and describes how to obtain the information.

Table 1-1Obtaining version information

Component	With ProLink II	With DeviceNet tool(1)	With display
Transmitter software	ProLink II title bar or	Identity Object (0x01)	OFF-LINE MAINT/VER
revision(2)	View/Installed Options/	Instance 1
	Software Revision	Attribute 198
Software revision	Not available	Identity Object (0x01)	Not available
corresponding to revision		Instance 1
specified on ODVA		Attribute 4
certificate
Hardware revision	Not available	Identity Object (0x01)	Not available
		Instance 1
		Attribute 105

(1)See Chapter 5 for more information.

(2)Also represents the core processor version.

1.6Communication tools

Most of the procedures described in this manual require the use of a communication tool. The following communication tools can be used:

•Transmitter display, if the transmitter was ordered with a display. The display provides only partial configuration functionality.

•ProLink® II software, v2.5 and later. ProLink II provides complete configuration functionality for the transmitter, but does not provide DeviceNet configuration functionality.

•Pocket ProLink software, v1.3 and later. Pocket ProLink provides complete configuration functionality for the transmitter, but does not provide DeviceNet configuration functionality.

•Customer-supplied DeviceNet tool. Capabilities depend on the tool.

2 Micro Motion® Model 2400S Transmitters for DeviceNet™