Emerson Process Management 2400S 208772.63, STDMI for ED Net Mass Inventory, With the display

Using the Transmitter

7.7.1Viewing current values for totalizers and inventories

You can view current values for the totalizers and inventories with the display (if your transmitter has a display), ProLink II, or a DeviceNet tool.

With the display

You cannot view current totalizer or inventory values with the display unless the display has been configured to show them. See Section 8.9.5.

To view a totalizer or inventory value, refer to Figure 7-2and:

1.Check for the word TOTAL in the lower left corner of the LCD panel.

•If Auto Scroll is enabled, wait until the desired value appears on the LCD panel. You can also Scroll until the desired value appears.

•If Auto Scroll is not enabled, Scroll until the desired value appears.

2.Check the unit of measure to identify the process variable being displayed (e.g., mass, liquid volume, gas standard volume).

3.Check the unit of measure line to determine whether you are viewing a totalizer value or an inventory value:

•Totalizer value: the unit of measure is a steady display.

•Inventory value: the unit of measure alternates with one of the following:

-MASSI (for Mass Inventory)

-LVOLI (for Liquid Volume Inventory)

-GSV I (for Gas Standard Volume Inventory)

-TCORI (for API Temperature Corrected Inventory)

-STDVI (for ED Standard Volume Inventory)

-NETVI (for ED Net Volume Inventory)

-STDMI (for ED Net Mass Inventory)

4.Read the current value from the top line of the display.

Figure 7-2Totalizer values on display

TOTAL

Current value

208772.63

TOTAL

Scroll optical switch

L

Unit of measure

Select optical switch

48 Micro Motion® Model 2400S Transmitters for DeviceNet™