Emerson Process Management 2400S manual Appendix C, Device Profile, C.1 Overview

Appendix C

Device Profile

Menus

C.1 Overview

This appendix documents the most commonly used portions of the Model 2400S DN transmitter’s device profile, including class/instance/attribute information and required codes.

The following object classes and instances are documented:

•Analog Input Point Object (0x0A), Instance 1 (mass flow) – see Table C-1

•Analog Input Point Object (0x0A), Instance 2 (liquid volume flow) – see Table C-2

•Analog Input Point Object (0x0A), Instance 3 (density) – see Table C-3

•Analog Input Point Object (0x0A), Instance 4 (temperature) – see Table C-4

•Gas Standard Volume Object (0x64), Instance 1 – see Table C-5

•Calibration Object (0x65), Instance 1 – see Table C-6

•Diagnostics Object (0x66), Instance 1 – see Table C-7

•Sensor Information Object (0x67), Instance 1 – see Table C-8

•Local Display Object (0x68), Instance 1 – see Table C-9

•API Object (0x69), Instance 1 – see Table C-10

•Enhanced Density Object (0x6A), Instance 1 – see Table C-11

Note: The listings for the Sensor Information and Enhanced Density Object instances are not

complete: only the most commonly used attributes are shown here. The following codes are documented:

•Totalizer and inventory measurement unit codes – see Tables C-12through C-14

•Process variable codes – see Table C-15

•Alarm index codes – see Table C-16

For measurement unit codes used for process variables, see Section 6.3.

For complete documentation of the device profile, see the manual entitled Micro Motion Model 2400S Transmitters for DeviceNet: Device Profile.

Device Profile

Display Codes

Index

Configuration and Use Manual 143