Emerson Process Management 2400S manual 1.7Planning the configuration

Before You Begin

In this manual:

•Basic information on using the transmitter’s user interface is provided in Chapter 3.

•Basic information on using ProLink II or Pocket ProLink, and connecting ProLink II or Pocket ProLink to your transmitter, is provided in Chapter 4. For more information, see the ProLink II or Pocket ProLink manual, available on the Micro Motion web site (www.micromotion.com).

•Basic information on using a customer-supplied DeviceNet tool is provided in Chapter 5. For more information, see the documentation provided with the tool.

1.7Planning the configuration

Refer to the configuration overview flowchart in Figure 1-1to plan transmitter configuration. In general, perform configuration steps in the order shown here.

Note: Depending on your installation and application, some configuration tasks may be optional.

Note: This manual provides information on topics that are not included in the configuration overview

flowchart, e.g.: using the transmitter, troubleshooting, and calibration procedures. Be sure to review these topics as required.

Before You Begin

Startup

Transmitter User Interface

Using ProLink II

Configuration and Use Manual 3