Required Transmitter Configuration
6.3.4Temperature units
The default temperature measurement unit is °C. See Table
Table 6-6 Temperature measurement units
|
| Temperature unit |
|
|
|
|
|
|
|
Display | ProLink II | DeviceNet tool | DeviceNet code | Unit description |
|
|
|
|
|
°C | °C | degC | 0x1200 | Degrees Celsius |
|
|
|
|
|
°F | °F | degF | 0x1201 | Degrees Fahrenheit |
|
|
|
|
|
°R | °R | degR | 0x1202 | Degrees Rankine |
|
|
|
|
|
°K | °K | Kelvin | 0x1203 | Kelvin |
|
|
|
|
|
6.3.5Pressure units
The flowmeter does not measure pressure. You need to configure the pressure units if either of the following is true:
•You will configure pressure compensation (see Section 9.2). In this case, configure the pressure unit to match the pressure unit used by the external pressure device.
•You will use the Gas Wizard, you will enter a reference pressure value, and you need to change the pressure unit to match the reference pressure value (see Section 8.2).
If you do not know whether or not you will use pressure compensation or the Gas Wizard, you do not need to configure a pressure unit at this time. You can always configure the pressure unit later.
The default pressure measurement unit is PSI. See Table
Table 6-7 Pressure measurement units
| Pressure unit |
|
| |
|
|
|
|
|
Display | ProLink II | DeviceNet tool | DeviceNet code | Unit description |
|
|
|
|
|
FTH2O | Ft Water @ 68°F | FtH2O(68F) | 0x082D | Feet water @ 68 °F |
|
|
|
|
|
INW4C | In Water @ 4°C | InH2O(4C) | 0x0858 | Inches water @ 4 °C |
|
|
|
|
|
INW60 | In Water @ 60°F | InH2O(60F) | 0x0859 | Inches water @ 60 °F |
|
|
|
|
|
INH2O | In Water @ 68°F | InH2O(68F) | 0x082C | Inches water @ 68 °F |
|
|
|
|
|
mmW4C | mm Water @ 4°C | mmH2O(4C) | 0x085A | Millimeters water @ 4 °C |
|
|
|
|
|
mmH2O | mm Water @ 68°F | mmH2O(68F) | 0x082E | Millimeters water @ 68 °F |
|
|
|
|
|
mmHG | mm Mercury @ 0°C | mmHg(0C) | 0x1303 | Millimeters mercury @ 0 °C |
|
|
|
|
|
INHG | In Mercury @ 0°C | InHg(0C) | 0x1304 | Inches mercury @ 0 °C |
|
|
|
|
|
PSI | PSI | psi | 0x1300 | Pounds per square inch |
|
|
|
|
|
BAR | bar | bar | 0x1307 | Bar |
|
|
|
|
|
mBAR | millibar | mbar | 0x1308 | Millibar |
|
|
|
|
|
G/SCM | g/cm2 | g/cm2 | 0x082F | Grams per square centimeter |
|
|
|
|
|
KG/SCM | kg/cm2 | kg/cm2 | 0x0830 | Kilograms per square centimeter |
|
|
|
|
|
PA | pascals | PA | 0x1309 | Pascals |
|
|
|
|
|
KPA | Kilopascals | kPA | 0x130A | Kilopascals |
|
|
|
|
|
Using a DeviceNet Tool
Required Configuration
Using the Transmitter
Optional Configuration
Configuration and Use Manual | 33 |