3.Use the show-devscommand to list the system devices.

You should see output, similiar the following example, displayed on your screen.

ok show-devs /SUNW,ffb@1e,0 /SUNW,UltraSPARC-II@0,0 /counter-timer@1f,1c00 /pci@1f,2000 /pci@1f,4000 /virtual-memory /memory@0,60000000 /aliases

/options

/openprom

/chosen

/packages

/pci@1f,4000/SUNW,hme@4,1

/pci@1f,4000/pci108e,1000@4

/pci@1f,4000/pci@2

/pci@1f,4000/scsi@3

/pci@1f,4000/network@1,1

/pci@1f,4000/ebus@1

/pci@1f,4000/scsi@3/tape

/pci@1f,4000/scsi@3/disk

SUNW,hme identifies the Sun FastEthernet PCI Adapter Ethernet device.

network identifies the motherboard network interface.

If these devices are not listed, check that the adapter is properly seated and reinstall the adapter, if necessary.

Diagnostics Testing

For Sun FastEthernet PCI Adapter diagnostic testing, see Appendix A, “Using the selftest Diagnostics,” and refer to the SunVTS User’s Guide.

8 Sun FastEthernet PCI Adapter Installation and User’s Guide • July 1997

Page 20
Image 20
Sun Microsystems 805-1759-10 manual Diagnostics Testing, Use the show-devscommand to list the system devices