Ethernet FCode selftest Diagnostic

Type the following to run selftest using the test command:

ok setenv diag-switch? true ok test <device-path>

Hme register test -- succeeded. Internal loopback test -- succeeded.

Transceiver check -- Using Onboard Transceiver - Link Up. passed

Doing more loopback tests -- passed ok

The following tests are run when the test command is executed:

hme register

MAC Internal Loopback

100 Mbps PHY Loopback

100 Mbps TP Loopback

10 Mbps XCVR Loopback

18 Sun FastEthernet PCI Adapter Installation and User’s Guide • July 1997

Page 30
Image 30
Sun Microsystems 805-1759-10 Ethernet FCode selftest Diagnostic, Type the following to run selftest using the test command