Advanced Operations
Process Timer key
1.Press the Process Timer key to enter any waiting, reaction or handling times that have to be taken into account. Use the alphanumeric keypad to enter the time. Press OK and confirm the input by pressing OK again.
Note: This time is integrated into the measurement process.
Note: The entered measurement sequence is displayed.
[R] key / Reading...
1.Press the [R] key to program a measurement of the substance that is to be analyzed. Confirm with OK.
2.Press New and then Reading... and use the alphanumeric keypad to enter the wavelength at which the measurement is to be completed. Press OK and confirm the input by pressing OK again.
3.If measurements are to be completed at a number of wavelengths, repeat the above two steps for each wavelength.
Note: The entered measurement sequence is displayed.
{} key
Elements of the measurement sequence that are to be repeated are placed in brackets.
The left bracket "{"marks the start of the sequence that is to be repeated and the right bracket "}" marks the end.
Note: The key showing the right bracket remains inactive until a left bracket is entered.
1.Press {.
2.Press the key that defines the sequence that is to be repeated: [Z] or [R]. Confirm with OK.
3.Press New and then press Zeroing... or Reading... and use the alphanumeric keypad to enter the wavelength at which the measurement should be completed. Press OK and confirm the input by pressing OK again.
4.Press } to end the sequence.
Note: If an action such as a zero measurement recurs at different stages of a measurement sequence, the series of actions is numbered sequentially (e.g. Z1, Z2, etc.).
74
