
| Table of Contents |
6.2 Favorite Programs | 81 |
6.2.1 Recall a favorite program | 81 |
6.2.2 Delete a favorite program | 81 |
6.3 Standard Addition – monitoring/checking results | 82 |
6.3.1 Complete a standard addition | 83 |
6.4 Single Wavelength (absorbance, concentration and transmittance measurements) | 87 |
6.4.1 Set up single wavelength mode | 87 |
6.4.2 Take single wavelength measurements | 89 |
6.5 | 90 |
6.5.1 Set the reading mode at different wavelengths | 90 |
6.5.2 Complete a measurement in the multi wavelength mode | 93 |
6.6 Time course of absorbance/transmittance | 94 |
6.6.1 Time course setup parameters | 94 |
6.6.2 Time course scan reading | 95 |
6.6.3 Analysis of time course data | 96 |
6.6.3.1 Navigation of a time scan or a time scan analysis | 97 |
6.7 System checks | 97 |
6.7.1 Instrument information | 98 |
6.7.2 Upgrade of the instrument software | 98 |
6.7.3 Optical checks | 99 |
6.7.3.1 Wavelength check | 99 |
6.7.3.2 Stray light check | 100 |
6.7.3.3 Absorbance check | 101 |
6.7.3.4 Verification kit | 102 |
6.7.4 Output checks | 104 |
6.7.5 Lamp history | 104 |
6.7.6 Factory service | 104 |
6.7.7 Service time | 105 |
6.7.8 Instrument Backup | 106 |
Section 7 Maintenance | 109 |
7.1 Cleaning requirements | 109 |
7.1.1 Spectrophotometer | 109 |
7.1.2 Display | 109 |
7.1.3 Cuvettes/sample cells | 109 |
7.2 Insert or change of the battery | 110 |
7.2.1 Information about using the battery | 111 |
7.2.1.1 Dispose of the lithium battery | 111 |
7.2.1.2 Optimal operation of the battery | 112 |
7.2.1.3 Lifespan of the battery | 112 |
7.2.1.4 Load the battery/Operating time | 112 |
7.3 Lamp replacement | 113 |
Section 8 Troubleshooting | 117 |
Section 9 Replacement Parts | 119 |
Section 10 Contact Information | 121 |
Section 11 Limited Warranty | 123 |
Index | 125 |
5