Hach DR 2800 Basic test-specific and sample-specific data settings, Barcode program options

Standard Operations

5.5.3.1Change of the default setting of the chemical form

1.Insert the blank or sample cuvette/cell (depending on the working procedure) into the cell compartment.

2.In the result display, press Options>More>Chemical Form.

3.A list of available evaluation forms appear. Select the new default setting.

4.Press Save as Default.

The current result and all further measurements will be displayed in the new chemical form.

5.5.4 Basic test-specific and sample-specific data settings

Press Options to change test or sample specific settings.

	Table 5 Barcode program options
Options	Description
More	For further Options
Store Off/On	With the Store On setting, all measurement data are stored automatically. With the Store Off
	setting, no measurement data are stored.
Abs % Trans	To switch to % transmittance or absorbance readings
Send Data icon /	To send data to a printer, computer or USB memory stick (Type A)
Send Data
	This functions as a stopwatch. It helps to ensure that the steps of an analysis are correctly timed
Timer icon	(e.g. reaction times, wait times, etc., can be exactly specified). When the specified time has
	elapsed, an acoustic signal is emitted. The use of the timer has no influence on the measurement
	program.
	A corrective dilution factor can be entered in order to take account of certain properties.
	The number entered at the dilution factor prompt will be multiplied by the result to compensate for
Dilution Factor Off/On	the adjustment. For example, if the sample has been diluted by a factor of 2, enter 2. The default
	setting of the dilution factor is turned off.
	Note: When a dilution is in effect, the dilution icon will appear on the display.
	Note: If undiluted samples are used, set the dilution factor off.
Chemical Form	Some of the stored tests/methods allow to select the chemical form and the measuring range.
Edit	To modify an existing program

53