Installation
Figure 4 Cuvette/Sample cell adapters
110 mm square cuvette/sample cell adapter (A)
21 inch
31 inch round cuvette/sample cell adapter (C)
3.5.2Installation of the cuvette/sample cell adapters
1.Open the cell compartment.
2.Select the correct adapter for the cuvette/sample cell type.
3.Insert the adapter so the arrow on top of the adapter points to the left (Figure 5 on page 16) and the orientation tab fits the groove in the compartment opening. The cuvette/sample cell type imprint should be legible on the adapter (Figure 4).
Note: The arrow on top of the adapter indicates the direction of the light beam path.
15
