Xerox 5000 manual Tray Options, Choose the default settings for the following options

2. System Settings

TIP: After running your print job, reenter Administrator mode, System Settings, NVM Read/Write, and switch off the feature that is currently on. Follow the steps outlined in this procedure and use these settings for the New Value number:

•To switch off the Special Media Setting for Drilled Papers, enter 1000.

•To switch off the Special Media Setting for LEF Tab Stock, enter 0.

•To switch off the Carbonless Media, enter 0.

TIP: To prevent paper jams from occurring with stock types other than the ones mentioned in this procedure, you must switch off the NVM Read/Write feature before running other print jobs.

Tray Options

Use this feature to change the factory default settings for the following:

•Auto Tray Switching

•Auto Paper Selection

•Do Not Include

•Paper Tray Air Assist

•Tray Priority

Auto Tray Switching, Auto Paper Selection, and Do Not Include

	Choose the default settings for the following options:
Default Setting	What the Default Does
Auto Tray Switching	Allows the digital press to automatically select another paper tray, containing the
(ATS)	appropriate paper, if the selected paper tray becomes unusable.
Auto Paper Selection	Allows the digital press to automatically select the appropriate paper size for the
(APS)	job being processed, without a specific paper tray being selected.
	When Single Paper Weight is selected as the default setting, Auto Paper selects
	only 81-105 g/m2 paper in the correct size. When the Mixed Paper Weight
	Productivity Setting is enabled, Auto Paper selects only 106-135 g/m2 paper in the
	correct size.
Do Not Include	Selecting a tray or trays in this option tells the machine to ignore any selections
	that were made in the Auto Tray Switching or the Auto Paper Selection options.

DocuColor 5000 Administrator Guide 2-23