Xerox 5000 manual Next Running test prints

3. Profiles

15. If required, choose a Paper Tray Air Assist option from the pull-down menu.

TIP: The default setting Use Tray Option. It is recommended that you leave this option at its default setting until you run test prints and evaluate the output of the prints. Test Print is discussed in more detail in Running test prints.

NOTE: Refer to page 3-31for information on the Paper Tray Air Assist.

16.

17.

Load your custom paper in the desired paper tray.

Ensure that you select the correct paper information in the

Tray Properties window (size, weight, type). From the Type pull-down menu, select the correct Custom Paper Profile.

18. Next: Running test prints.

DocuColor 5000 Administrator Guide 3-23