Xerox 5000 manual Decurler settings A-D

3. Profiles

Decurler settings A-D

The default Decurler settings for Type A through Type D are shown in the following table. These settings are automatically selected by the digital press.

All Trays		Western	Eastern
	Paper Types	Hemisphere	Hemisphere
Paper Weights
		Paper Type	Paper Type
60 - 80 g/m2	Coated	A	B
	Uncoated	A	B
81 - 105 g/m2	Coated	B	B
	Uncoated	D	D
106 - 135 g/m2	Coated	A	A
	Uncoated	B	B
136 - 186 g/m2	Coated	A	A
	Uncoated	A	A
187 - 220 g/m2	Coated	A	A
	Uncoated	A	A
221 - 300 g/m2	Coated	A	A
	Uncoated	A	A

NOTE: The settings in the above table were developed from testing a wide range of paper samples, toner area coverages, and environments. The outcome of this testing is the preset parameters shown in the table, and these parameters refer to how particular papers interact with the digital press decurling system.

If paper curl is a problem, using one of these preset parameters usually eliminates the problem. However, due to the broad range of paper variables, image coverage, and environmental factors, these defaults settings may not result in satisfactory performance.

3-34 DocuColor 5000 Administrator Guide